逆向反射器常数的调查
R.E.Mclean ,陈明慧
摘要(Abstract)：
除微波测距仪外,电子测距仪测定距离的方法,都是量测由逆向棱镜反回的调制载波。测出的值还要作一些改正,而改正数取决于棱镜玻璃表面和中心标志之间的偏距,以及棱镜玻璃厚度与折射率的乘积。通常称改正数为棱镜常数,应从测得的值中减去棱镜常数,并规定它的公差在±1毫米内。但是,对电子测距仪所用三种型号的棱镜进行物理测定后表明,许多棱镜常数已超出公差,需重新确定出与制造有关的新的棱镜常数。
关键词(KeyWords)：
基金项目(Foundation):
作者(Author): R.E.Mclean ,陈明慧
参考文献(References)：
- 1． Kennie, T. J.M., 1982． Retro-Reflective Materials and Electro-Optical Distance Measurement. Technical Papers, 42 Annual Meeting American Congress of Surveying & Mapping.
- 2． Rueger,J.M., 1978． Misalignment of EDM Reflectors and its Zffects. Australian Surveyor, March 1978, 29 (1) .
- 3． AGA Newsletter, NO. 13, October 1975．
- 4． Schofield, W., 1976． An initial evaluation of the AGA Geodimeter model 6BL, p.22a.Kingston Polytechnic, UK.
- 5． MWD letter to agents for 'Retro Ray, Sokkisha & Wild, June 1983．
- 6． Letter from AGA Australia, June 1983．
- 7． Letter from USA agents for Retro Ray, August 1983．
- 8． Telex and data from Warburton Franki, Sokkisha agents, July 1983．
- 9． Letter from Wild Heerbrugg, Switzerland, June 1983．
- 10． Jenks, H.J., 1965． The Geodimeter Model 4B in Practical Use. (Discussion). NZ Surveyor, March 1965, XXIV (4) .